We offer a wide variety of hard, soft and exotic wood species which include red oak, white oak, basswood, cherry, maple, pine, birch, aspen, lyptus, ash, cedar, poplar, walnut, alder, and many others. We also carry stock in character grade in many species.
Typically, 2 weeks, from purchase order/deposit and drawing approval. Orders which do not have accurate drawings or samples may take longer.
A sample, full scale drawing or accurately scaled drawing with dimensions is preferred. Additional information such as species of wood and quantity required are needed.
We do not have a minimum order, however, each order is made up of four components: design, material, machining and set up. The only variables are design time and set up. The more pieces per order the lower the charges per piece.
The customer is responsible for all shipping costs including (where necessary, brokerage). We do work with our customers to find the most advantageous rates possible for shipping.
We turn from fishing lure size to large columns measuring
12” in diameter x 8 ’ long.
We typically respond in 24 hours unless it is a complex turning. If it will take more than 24 hours we will notify you.
We can produce as few as one piece up to thousands depending on your specific needs. Our computerized lathes require minimum set up time for the one of a kind…but because they are high speed, hopper fed and computer operated they have large volume capabilities.
Yes, we understand the importance of product development and will consider a limited exclusive arrangement at the customers request.
Glacial Wood Products was formed and incorporated on January 1, 1991.
Because of our fast response time we carry very little inventory. However, we maintain a safety stock to protect the interests of our repeat customers.
We do not solicit sales to the public, but we will attempt to accommodate those needs as long as they do not conflict with our dealer and OEM accounts.
We sell dowels at most sizes up to 11” in diameter in any species.
We do not currently offer lumber for sale unless there is “added value.”
Yes! Feel free to download it from our Web site, or contact us for a printed copy.
Brooten is located 125 miles NW of Minneapolis on State Highway 55. Visitors are always welcome; however, it is advisable to call in advance to insure that we can be accommodating.
Yes, We are equipped to do certain types of assembly work. It is our goal to be as full-service as possible.
GWP has contracts with UPS, Speedy, FedEx and several trucking companies. Our experienced staff can assist with determining the best method for the least amount of money.
Yes, Appropriate methods of sanding are utilized to achieve final finish. Typically, 180-200 grit sand paper is used depending on the wood species.
Humidity is a very significant factor in maintaining long life of all wood products. GWP operates special humidification machines which maintain relative humidity throughout our shop at 36% - 38%. If the air gets too dry, wood parts may show checking or even split. If the air becomes too moist, wood has a tendency to warp and twist. All "glued up" wood parts must be kept out of water. Most glue used for normal manufacturing purposes will “fail” if exposed to water. There are glues available for use in high moisture areas, but this requirement must be clearly specified at the time of order.
"Glued up" blanks are preferred in order to control warping and splitting. Solid squares are unable to be properly dried in the kilns to minimize shrinkage as the wood cures to its stabilized point.
